Guidelines

Guide for Authors

Last updated 24 Oct 2026

This guide explains how to prepare and submit a manuscript to Sustainable EcoSciences, and what happens after submission. Please read it in full before you submit. Manuscripts that do not follow it may be returned to the authors before review.

Introduction

Sustainable EcoSciences publishes original research and reviews across the environmental and Earth sciences. See the Aims and Scope for the subject areas covered. All articles are published open access under the Creative Commons Attribution 4.0 licence (CC BY 4.0).

Article types and length

Article typeMain text (guide)AbstractFigures and tables
Research Article5,000 to 8,000 wordsup to 300 wordsup to 10
Review Article6,000 to 12,000 wordsup to 300 wordsup to 12
Short Communicationup to 3,000 wordsup to 150 wordsup to 4
Data Article2,000 to 4,000 wordsup to 200 wordsup to 6
Technical Note2,000 to 4,000 wordsup to 200 wordsup to 6
Perspective2,000 to 4,000 wordsup to 200 wordsup to 4
Letter to the Editorup to 1,000 wordsnoneup to 1

Word counts exclude the title page, abstract, references, figure captions and tables. Longer manuscripts are considered when the length is justified by the content. Additional material can be placed in supplementary files.

Contact

Questions about preparing or submitting a manuscript can be sent to info@sustainableecosciences.com.

Submission checklist

Before you submit, check that you have:

  • one author designated as corresponding author, with full contact details;
  • a manuscript file with line numbers and page numbers, including keywords and all figure captions and tables;
  • all figures as separate, high-resolution files;
  • three to five highlights;
  • a graphical abstract (recommended);
  • all references cited in the text listed in the reference list, and vice versa, in IEEE style;
  • permission to reproduce any copyrighted material;
  • declarations of competing interests, funding, author contributions (CRediT), data availability and any use of generative AI;
  • an anonymized manuscript file if the journal uses double-blind review;
  • a cover letter and, optionally, suggested and opposed reviewers.

Before you begin

Ethics in publishing

All authors must follow the journal's Publication Ethics policy, which is based on the guidance of the Committee on Publication Ethics (COPE).

Research involving people, animals and protected sites

Studies involving human participants (for example surveys, interviews or exposure studies) must have approval from an appropriate ethics committee and informed consent from participants. Studies involving animals must comply with relevant national and institutional guidelines. State the name of the approving body and the approval reference in the Methods section.

Fieldwork, permits and samples

Fieldwork and sampling must comply with the laws of the country where they took place. State the permits obtained for work in protected areas, for sampling protected species, and for the export of samples. Research using genetic resources must comply with the Nagoya Protocol where applicable. Authors are encouraged to register physical samples with an International Generic Sample Number (IGSN) and to cite it in the manuscript.

Declaration of competing interests

All authors must disclose any financial or personal relationships that could be seen to influence their work, such as employment, consultancies, stock ownership, honoraria, paid expert testimony, patents, or grants from organisations with an interest in the results. If there are none, state: "The authors declare no competing interests."

Declaration of generative AI use

Authors who used generative AI or AI-assisted tools in writing the manuscript must declare it in a separate section before the references, naming the tool and describing how it was used. Such tools may be used to improve readability and language, but not to replace the authors' scientific work, interpretation or conclusions. Authors are responsible for the content. AI tools cannot be authors. Using AI to create or alter images or data is not permitted unless it is part of the research method and is described in the Methods.

Submission declaration

Submission implies that the work has not been published before (except as an abstract, part of a thesis or a preprint), is not under consideration elsewhere, has been approved by all authors and by the responsible authorities where the work was carried out, and will not be published elsewhere in the same form if accepted.

Preprints

You may post your manuscript on a preprint server at any time. Please give the preprint DOI in the cover letter. After publication, link the preprint to the published article.

Inclusive language

Use language that respects all people and avoids assumptions about the beliefs or circumstances of readers. Avoid terms that imply bias based on gender, ethnicity, culture, disability or age. Name places and peoples as they wish to be named.

Maps and geographical names

Sustainable EcoSciences remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Authors are responsible for the boundaries and names shown in their maps.

Author contributions and changes to authorship

Describe each author's contribution using the CRediT taxonomy. All authors must meet the journal's authorship criteria. Changes to the author list after submission require the agreement of all authors and the approval of the editor.

Funding

List all sources of funding and describe the role of the funders, if any, in study design, data collection, analysis, interpretation, writing and the decision to submit. If funders had no role, say so.

Open access and charges

The article processing charge is 100 USD per accepted article. It is invoiced only after acceptance, and waivers are available as described below.

No APC: 100% waiver in Article Publishing Charge (APC). This discount is valid for articles submitted by 31 May 2027. Nothing needs to be requested: the invoice of such a manuscript is closed with no amount due.

See Article Processing Charges for waivers.

Language

Manuscripts must be written in clear English, using British or American spelling consistently. Authors who are not confident in their English may wish to have the manuscript checked before submission. Language editing is not required and does not influence editorial decisions.

Submission

Submit online through your author dashboard. The submission form guides you through the article type, title and abstract, authors and affiliations, keywords, files, declarations and reviewer suggestions. You can follow the status of your manuscript at every stage and will receive all correspondence by email and in your dashboard.

Start a submission

Suggested reviewers

Suggest at least five potential reviewers with relevant expertise, giving their institutional email addresses. They must not have collaborated with any of the authors in the last three years or work at the same institution. You may also name people who should not review the manuscript, with a reason. The editor decides whom to invite.

Preparation

Peer review

The journal currently uses single-blind peer review. If double-blind review applies, prepare a title page with all author details separately, and remove names, affiliations, acknowledgments, funding details and self-identifying citations from the anonymized manuscript and its file properties. See the Peer Review Policy.

File formats

Submit the manuscript as a Word (DOCX), OpenDocument (ODT), PDF or LaTeX file with continuous line numbers. The easiest start is the journal's Word template: it contains the article structure, styles, declarations and reference style described in this guide, in the two-column layout of published articles. A plain single-column layout with 1.5 line spacing is also fine. If you use LaTeX, include the source files and a compiled PDF. Accepted articles are typeset by the journal, so the layout of the submitted file does not affect the editorial decision.

Download the Word template DOCX, 428 KB

Article structure

  • Subdivision. Divide the article into clearly defined, numbered sections (1, 1.1, 1.1.1). Refer to sections by number in the text.
  • Introduction. State the objectives and provide adequate background, avoiding a detailed literature survey.
  • Study area. For field studies, describe the location with a map that shows coordinates, a scale bar and a north arrow, and give the relevant climate, geology, land use or other context.
  • Materials and methods. Give enough detail for the work to be reproduced, including sampling design, analytical methods, quality assurance and quality control, detection limits, model versions and configurations, and statistical methods. Cite published methods rather than repeating them, and describe any modifications.
  • Results. Present the results clearly and concisely, with uncertainties.
  • Discussion. Explore the significance of the results, compare them with previous work and discuss limitations. Results and Discussion may be combined.
  • Conclusions. State the main conclusions and their implications in a short section.
  • Appendices. Number appendix equations, tables and figures separately: Eq. (A.1), Table A.1, Fig. A.1.

Title page information

  • Title: concise and informative, without abbreviations or formulae where possible.
  • Authors and affiliations: full names, and for each author the institution, city and country where the work was done. Provide ORCID iDs where available.
  • Corresponding author: one author who handles correspondence during review and after publication, with an up-to-date email address.
  • Present address: if an author has moved since the work was done, give the new address as a footnote.

Highlights

Three to five bullet points that capture the novel results and approaches, each with a maximum of 85 characters including spaces.

Abstract

A single paragraph that states the purpose of the research, the methods, the principal results with key numbers, and the main conclusions. The abstract must stand alone: avoid references, and define any essential abbreviations.

Graphical abstract

A single image that summarises the article for a broad readership, shown with the abstract and in article lists. Provide an image of at least 1,200 × 900 pixels, readable at small size, as PNG, JPG or TIFF. A PDF, Word (DOC, DOCX) or PowerPoint (PPT, PPTX) file is also accepted. Graphical abstracts are strongly recommended.

Keywords

Give three to five keywords that do not repeat words in the title, separated by semicolons, using British or American spelling consistently and avoiding general or plural terms.

Abbreviations

Define abbreviations at their first use in the abstract and again in the main text. Use abbreviations only for terms that appear often.

Acknowledgments

List people and organisations who helped with the research but do not meet the authorship criteria, for example those who provided language help, technical support, field assistance, samples or data. Place acknowledgments in a separate section before the references.

Units, nomenclature and conventions

  • Use the International System of Units (SI). Give concentrations with their basis, for example mg L-1, µg kg-1 dry weight or µg m-3.
  • Give geographic coordinates in decimal degrees (WGS84) and state the map projection.
  • Use the International Chronostratigraphic Chart for geological time, and give ages with their uncertainty and dating method.
  • Report stable isotope ratios in delta notation (δ) in per mil (‰) relative to the international standard used, for example VSMOW or VPDB.
  • Follow IUPAC rules for chemical names, International Mineralogical Association names for minerals, and the relevant international codes of nomenclature for organisms. Give scientific names in italics, with the authority at first use where appropriate.
  • Use footnotes sparingly.

Mathematical formulae

Write equations with an equation editor or LaTeX, not as images. Number displayed equations consecutively, (1), (2), and refer to them in the text. Define every symbol and give units.

Figures

  • Upload each figure as a separate file: TIFF, PNG or JPG for images at a minimum of 300 dpi, and PDF or EPS for vector graphics, or 600 dpi for line art. A figure can also be uploaded as a Word (DOC, DOCX) or PowerPoint (PPT, PPTX) file, one figure per file.
  • Size figures to fit one column (85 mm) or the full page width (176 mm), with lettering that remains readable at that size.
  • Use colour palettes that are readable by people with colour-vision deficiency and in greyscale. For continuous data, use perceptually uniform colour maps (for example viridis or cividis) rather than rainbow maps.
  • Maps must include coordinates or a graticule, a scale bar, a north arrow where needed and a legend, and must cite the source of any base map.
  • Number figures in the order they are cited. Give each a caption that explains all symbols and abbreviations so it can be understood on its own.
  • Do not alter images in ways that misrepresent the data. Adjustments must be applied to the whole image and described.

Tables

Submit tables as editable text, not as images. Number them in the order they are cited, place a title above each table and any notes below, and avoid vertical rules and shading. Do not duplicate results presented elsewhere in the article.

References

Sustainable EcoSciences uses the IEEE reference style.

Citation in the text

Cite references with numbers in square brackets, in the order in which they are first cited: [1], [2], [3]–[5]. The same number is used every time a reference is cited. The author's name may be used in the sentence, for example "as shown by Smith et al. [4]". Cite unpublished results and personal communications in the text only, not in the reference list.

Reference list

List references in numerical order. Give all author names for up to six authors; for more, give the first author followed by "et al.". Include the DOI for every reference that has one. Examples:

  • Journal article: A. B. Author, C. D. Author, and E. F. Author, “Title of the article,” Abbrev. Journal Title, vol. 12, no. 3, pp. 45–67, 2025, doi: 10.xxxx/xxxxx.
  • Article with an article number: A. B. Author and C. D. Author, “Title of the article,” Abbrev. Journal Title, vol. 900, Art. no. 165432, 2024, doi: 10.xxxx/xxxxx.
  • Book: A. B. Author, Title of the Book, 3rd ed. City, Country: Publisher, 2023.
  • Book chapter: A. B. Author, “Title of the chapter,” in Title of the Book, C. D. Editor, Ed. City, Country: Publisher, 2022, pp. 101–125.
  • Conference paper: A. B. Author, “Title of the paper,” in Proc. Name of Conference, City, Country, 2024, pp. 1–6.
  • Dataset: A. B. Author, “Title of the dataset,” Repository name, version 2, 2025, doi: 10.xxxx/xxxxx.
  • Software or code: A. B. Author, “Name of the software,” version 1.4, 2025. [Online]. Available: https://doi.org/10.xxxx/xxxxx
  • Report: Name of Organisation, “Title of the report,” City, Country, Rep. no. 12, 2023.
  • Thesis: A. B. Author, “Title of the thesis,” Ph.D. dissertation, Dept., University, City, Country, 2024.
  • Preprint: A. B. Author, “Title of the preprint,” Name of server, 2025, doi: 10.xxxx/xxxxx.
  • Web page: Name of Organisation, “Title of the page.” Website name. Accessed: Mon. Day, Year. [Online]. Available: URL

Reference-management software (for example Zotero, Mendeley or EndNote) can format references in IEEE style automatically.

Research data and supplementary material

Every research article must include a data availability statement. Deposit data, code and models in recognised repositories wherever possible and cite them in the reference list. See the Data Availability Policy.

Supplementary material (extended methods, additional figures and tables, data files, code, videos) is published with the article as supplied. Cite it in the text as Table S1, Fig. S1, and provide a short description of each file.

After acceptance

Proofs

The corresponding author receives a typeset proof online. Check it carefully, including author names, affiliations, figures, tables, equations and references, and approve it or return corrections within the time stated in the proof email, normally three working days. Only corrections of errors are possible at this stage.

Publication

Approved articles are published online as soon as they are ready. They are later assigned to an issue. The online version is the version of record and can be cited immediately.

Corrections after publication

Published articles are not changed. If you find an error in your article, contact the editorial office; the journal will publish a correction linked to the original article where needed.

Sharing your article

Because your article is open access, you can share it anywhere: on social media, academic networks, institutional repositories and your own website. Link to it so that citations and downloads are counted.

Author enquiries

You can follow the status of your submission in your author dashboard. For any other question, contact info@sustainableecosciences.com.